(7) Reed quick-acting tubing cutters are the industry standard; most recommended by plastic pipe companies and imitated by other manufacturers. They are the most practical cutters for small, medium, and large diameter work.
(3) Ratchet shears offer good mechanical advantage and smooth, easy operation. RS1 and RS1PLT are designed for one-hand cuts. Both also cut tracer wire. RS1PLT features a plated steel blade. RS2 is designed with new jaw shape and “Made in USA” quality. All ratchet shears blades are easily resharpened or replaced.
(2) Scissor shears squeeze together for fast cutting of thin wall and small diameter plastic, rubber, or nylon tubing. Rotate shears around tubing while squeezing handles together for best cut. Replacement Teflon coated blades available.
(2) Reed now offers a one-hand, 2" capacity shear designed, machined and assembled in the USA. This one-hand style will cut PE and PVC pipe used in gas, water, plumbing and industrial applications. One screw makes blade change simple
Great choice for pre-trench work and above ground cuts.
Legs and backbone for this vise are available, but must be ordered separately (#96014) and weight 50 lbs. To create legs, use1-1/12" Sch. 40 steel pipe.
Great choice for pre-trench work and above ground cuts.
Legs and backbone for this vise are available, but must be ordered separately (#96014) and weight 50 lbs. To create legs, use1-1/12" Sch. 40 steel pipe.
Great choice for pre-trench work and above ground cuts.
Legs and backbone for this vise are available, but must be ordered separately (#96014) and weight 50 lbs. To create legs, use1-1/12" Sch. 40 steel pipe.
(11) The Reed adjustable guide makes these the most economical, most convenient, and most versatile threader sets on the market. Because the guide adjusts to different sizes of pipe, it is only necessary to have a die for each pipe size, not a die and head. Other threader sets which require a die and a head for each size typically weigh over 25% more and take up considerably more room in the toolbox or truck. Further, with two pawls, handle swing is faster - half that of one pawl competitive sets, and best for close quarter work. Adjusting guides easily fit over coated pipe. These sets use the Reed solid die: the easiest starting, easiest cutting, and most precise threading of any die. ...
(10) Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc). Heat-treated steel, saw-toothed blades on the IC1S, IC1SL, IC3/4S, and IC3/4SL internal pipe cutters make for fast cutting. The IC1A comes with an abrasive blade for areas where the blade may come in contact with concrete or other hard surfaces which would destroy a saw-tooth blade. Available in a variety of sizes and styles, all internal pipe cutters fit in a standard 3/8” drill. During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping. All saw-toothed internal pipe cutter models cut plastic pipe aggressively and can cut wood ...
(8) Money-saving reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused. In this era of green living and recycling, try these reamers on PVC or CPVC to save time and material costs. Plastic Pipe Fitting Reamers are available in 4 sizes and fit into standard ½” drills. Reed Fitting Reamers feature a four-sided carbide insert which provides one extra cutting edge after 180 degree cutting insert rotation.
(2) With a strong aluminum alloy frame, effective|roller locking, and good tool life, a smooth 15° bevel is produced on all types of plastic pipe about one minute. Easily adjustable for different pipe sizes and thicknesses, with no part changes. A much faster, more consistent bevel than a file and much less dangerous than an abrasive saw! Also, it creates a continuous ribbon rather than chips and dust.
